LOYOLA-ICAM COLLEGE OF ENGINEERING AND TECHNOLOGY

Mechanical Engineering

  • Home
  • Mechanical Engineering

Mechanical Engineering Department was started with 60 students in the year 2010 and within a span of 4 years the strength has gone up to 550. The department has highly qualified, experienced and dedicated teaching and non-teaching faculty, some of them with more than 30 years of experience. There are 6 doctorates to guide the students in project modeling and project management. Labs with state-of-art resources and facilities are an added advantage of the student community. We have professionally trained faculty to teach students on “Design Thinking” which has bright future in mechanical engineering. LICET is one among the few colleges which has Automation lab to train the students in most advanced machining techniques. Our faculties also teach students of government schools in and around Chennai to perform routine things in a better way through design thinking.

We have tie – ups with a good number of universities and industries within and outside the country, through collaborations and research projects. We also maintain a close liaison with government and private bodies such as DAIKIN, NIWE, VALEO, PALS etc. We have DAIKIN – Center of excellence in our college premises to offer training to students as well as industry persons. The college has gone the extra mile of exposing the students to system discovery and system analysis (innovative programmes) in the I and II year respectively, helping them go beyond the Anna University syllabus. The III year students go to France (ICAM University) and participate in summer programmes that give them international exposure. A few of our students are doing their Master’s programme in France (ICAM University), USA (Fairfield University) and also in Germany. With the Global perspective, students learn French and German languages in addition to soft skill training, interview techniques, leadership grooming, skipper programmes, motor mechanic and robotic trainings. Our students consistently perform well and secure significant ranks in national level events, namely, BAJA, GO KART conducted for engineering students.

We provide holistic formation along with engineering education to students through Jesuits pedagogy. Apart from curricular activities, students are encouraged to participate in co-curricular and extra-curricular activities too. In short, it is a soul satisfying experience to be a student of the Mechanical Department of LICET.

+Vision & Mission

Vision

To develop competent and socially responsible mechanical engineers by providing quality education and research facilities.

Mission

Department of Mechanical Engineering is committed

  • To collaborate with world class technical institutions both national, international and R&D organizations to impart practical training, teaching, research and entrepreneurship in order to prepare globally competitive mechanical engineers.
  • To provide state of the art infrastructure and research facilities and adopting modern teaching methodologies and training to achieve academic excellence.
  • To form socially responsible mechanical engineers by inculcating ethics through value based education.

+PEO and PO

Program Educational Objectives

Bachelor of Mechanical Engineering curriculum is designed to impart Knowledge, Skill and Aptitude to the graduates to

PEO No. PEO
1 Have a successful career in Mechanical Engineering and allied industries.
2 Have expertise in the areas of Design, Thermal, Materials and Manufacturing.
3 Practice their profession with good communication skills, leadership, ethics and social responsibility.

Programme Outcomes

  • Engineering Knowledge:Apply the knowledge of mathematics, science, engineering fundamentals, and an engineering specialization to the solution of complex engineering problems.
  • Problem Analysis: Identify, formulate, research literature, and analyze complex engineering problems reaching substantiated conclusions using first principles of mathematics, natural sciences, and engineering sciences
  • Design/development of Solutions: Design solutions for complex engineering problems and design system components or processes that meet the specific needs with appropriate consideration for the public health and safety, and the cultural, societal, and environmental considerations.
  • Conduct Investigations of Complex Problems: Use research-based knowledge and research methods including design of experiments, analysis and interpretation of data, and synthesis of the information to provide valid conclusions.
  • Modern Tool usage: Create, select, and apply appropriate techniques, resources, and modern engineering and IT tools including prediction and modelling to complex engineering activities with an understanding of the limitations
  • The Engineer and Society: Apply reasoning informed by the contextual knowledge to assess societal, health, safety, legal, and cultural issues and the consequent responsibilities relevant to the professional engineering practice
  • Environment and Sustainability: Understand the impact of the professional engineering solutions in societal and environmental contexts, and demonstrate the knowledge of, and need for sustainable development
  • Ethics: Apply ethical principles and commit to professional ethics and responsibilities and norms of the engineering practice
  • Individual and Team Work: Function effectively as an individual, and as a member or leader in diverse teams, and in multidisciplinary settings
  • Communication: Communicate effectively on complex engineering activities with the engineering community and with society at large, such as, being able to comprehend and write effective reports and design documentation, make effective presentations, and give and receive clear instructions
  • Project Management and Finance: Demonstrate knowledge and understanding of the engineering and management principles and apply these to one’s own work, as a member and leader in a team, to manage projects and in multidisciplinary environments.
  • Life-long Learning: Recognize the need for, and have the preparation and ability to engage in independent and life-long learning in the broadest context of technological change.

Programme Specific Outcomes

PSO No. PSO
1 The students will be able to combine their theory, hands-on and software knowledge in the field of mechanical engineering to design and develop components and provide solutions to practical problems
2 The students will be able to apply their knowledge in the field of thermal and fluid sciences to simulate and develop solutions for real time applications.
3 The students will be able to apply knowledge and skill in various aspects of manufacturing technology and automation, to enhance productivity and cater to current industrial needs.
4 The students will be able to engage professionally in industries or as an entrepreneur by applying modern management practices.

+Lab Facility

S.No Lab Name Description Equipment Available
1 Engineering Practices Laboratory Experiments were conducted in civil and mechanical engineering concepts such as plumbing, carpentry, sheet metal work, welding and simple lathe machining.
  1. ANGLE GRINDING MACHINE
  2. AIR COOLED WELDING TRANSFORMER
  3. OIL COOLED WELDING TRANSFORMER
  4. EARTH FURNACE
  5. SMITHY BLOYER
  6. HAMER DRILL
  7. JIG SAW
  8. CIRCLE SAW MACHINE
  9. HAND SHEARING MACHINE
  10. GAS WELDING
  11. C CLAMP
  12. RUBBER MALLET
  13. CHISEL PYE772  2’’ 1’’3/8’’

 

  1. CARPENTRY VICE
  2. BENCH VICE
  3. JACK PLANE
  4. HAND SAW
  5. TRY SQUARE
  6. STEEL RULER
  7. MARKING GAUGE
  8.  HACKSAW FRAME
  9. PIPE VICE
  10. PIPEWRENCH
  11. DIE SET
  12. DOUBLE END SPANNER
  13. RING SPANNER
  14. SNIP   STRAIGHTSTRAIGHT

BEND

  1. DIVIDER
  2. ANVIL
  3. SQUARE STAKEROUND  ANVIL HORSE HEAD  STAKE
  4. CUTTING PLIER
  5. SCRIBER
  6. CUTOFF MACHINE
  7. PATPERN
  8. MOULDING BOX (CI)
  9. SMOOTHER
  10. GATE CUTTER
  11. MOULDING BOX(WOODEN)
  12. TRAVEL
  13. SLICK
  14. LIFTER
  15. VENT ROD
  16. VENT WIRE
  17. DRAW SPIKE
  18. SHOVEL
  19. RAMMER  BUDWEDGE
  20. RUNNER
  21. RISER
2 Manufacturing Technology Laboratory In manufacturing technology lab I, various machining operations such
as turning, step turning, taper turning, thread cutting, knurling, drilling and boring are taught and students make components such as square and hexagonal bolts and nuts, crank shaft and eccentric bush.
In manufacturing technology lab II, various machining operations such as milling, surface grinding, cylindrical grinding, tool grinding are taught and students make helical gear, spur gear and also measure force using lathe tool dynamometer and milling tool dynamometer
  1. Centre Lathe
  2. Shaping M/c 18”
  3. Shaping M/c 12”
  4. Surface grinding M/c
  5. Vertical Milling
  6. Horizontal Milling
  7. Cylindrical Grinding
  8. Gear Hobbing
  9. Turret and Capstan Lathe
  10. Radial Drilling M/c
  11. Planner 4ft
  12. Slotting M/c
  13. Tool Dynamometer
  14. Tool makers microscope
  15. Brazing M/c
  16. Injection moulding
  17. Milling tool dynamometer
  18. Tool and Cutter grider
  19. Gear Shaper
  20. Centreless Grinding
  21. 6” lathe
  22. Turret lathe
  23. All Gear lathe
  24. Master Centre lathe
  25. Sona lathe
  26. 2880 rpm Bench grinder

 

3 Fluid Mechanics and Machinery Laboratory Students calculate flow rate using flow meters such as venturimeter, orificemeter and rotameter. Students conduct performance test on rotodynamic pumps, positive displacement pumps, impulse and reaction turbines
  1. Orifice Meter Apparatus
  2. Venturimeter  Apparatus
  3. Rotameter Testing Apparatus
  4. Pipe Friction Apparatus
  5. Centrifugal Pump Testing Apparatus
  6. Submersible Pump testing Apparatus
  7. Reciprocating Pump Testing Apparatus
  8. Gear Oil Pump Testing Apparatus
  9. Pelton Turbine Testing
  10. Francis Turbine Testing
  11. Kaplan Turbine Testing
  12. Stop Watch
  13. Tachometer

 

4 Thermal Engineering Laboratory In thermal engineering lab I, students learn to conduct performance test and heat balance test on four stroke single cylinder and multi cylinder diesel and petrol engines under different loading like mechanical, hydraulic and electrical loading.
In thermal engineering lab II, students learn the basic heat transfer concepts such as conduction, convection and radiation and also analyze the heat transfer concepts in refrigerator, air conditioner, compressor and heat exchanger.
  1. Cut Section Model of 2 Stroke Petrol Engine
  2. Cut Section Model of 4 Stroke Diesel Engine
  3. Redwood Viscometer Apparatus
  4. Pensky Martin Flash and Fire Point Apparatus
  5. Cleaveland Flash and Fire Point Apparatus
  6. 4 Stroke 1 Cylinder Slow Speed Diesel Engine with Mechanical Dynamometer Apparatus
  7. 4 Stroke 1 Cylinder Petrol Engine with Electrical Bulb Loading Test Rig  Apparatus
  8. 4 Stroke 1 Cylinder Diesel Engine with Electrical Water Rheostat Test Rig  Apparatus
  9. 4 Stroke 2 Cylinder 10 HP Diesel Engine with Hydraulic Loading Apparatus
  10. 4 Stroke 1 Cylinder Horizontal Diesel Engine with Mechanical Dynamometer Apparatus
  11. 4 Stroke 4 Cylinder Petrol Engine with Hydraulic Dynamometer Test Rig Apparatus: Morse Test
  12. Cut Section Model of 4 Stroke Petrol Engine
  13. Cut Section Model of 4 Stroke 4 Cylinder Diesel Engine
  14. Steam Turbine and Steam Generator Test Rig Apparatus
  15. Data Acquisition System without Engine Test Rig Apparatus
  16. Cut Section Model of 4 Stroke 2 Cylinder Diesel Engine
  17. Tachometer Contact Type System
  1. Thermal Conductivity of Guarded Hot Plate Method Apparatus
  2. Heat Transfer in Lagged Pipe Apparatus
  3. Natural Convection Apparatus
  4. Pin Fin Apparatus
  5. Stefan Boltzmann Apparatus
  6. Emissivity Apparatus
  7. Forced ConvectionApparatus
  8. Parallel Flow and Counter Flow  Apparatus
  9. Refrigeration Test Rig Apparatus
  10. Air Conditioning Test Rig Apparatus
  11. Two Stage Air Compressor Test Rig Apparatus
  12. Air Conditioning Study System (Cut Section Model) Apparatus
  13. Composite Wall Apparatus
  14. Insulating Powder Apparatus
  15. HC Refrigeration Test Rig Apparatus
  16. Fluidized Bed Water Cooling Tower Mini Test Rig Apparatus

 

5 Strength of Materials Laboratory Students are taught to measure the various mechanical properties such as harness, impact strength, tensile strength, compressive strength, shear strength, stiffness.
  1. Universal Testing Machine
  2. Spring Testing Machine for tensile and compressive loads
  3. Double shear attachment- extensometer
  4. Specimens for Microscopic Study
  5. Brinell Hardness Testing Machine
  6. Rockwell Hardness Testing Machine
  7. Metallurgical Microscopes
  8. Impact testing Machine with accessories
  9. Torsion Testing Machine
  10. Jominy Fixture and end Quench unit
  11. Lechatlier Apparatus and Vicat Needle Apparatus – accessories
  12. Water bath
  13. Rossette strain gauge
  14. Muffle Furnace

 

6 Dynamics Laboratory Students are taught to measure damped and undamped vibrations and do experiments in various governing mechanisms
  1. Universal Governor
  2. Cam Analysis
  3. Motorized Gyroscope
  4. Whirling of Shaft
  5. Static Balancing Machine
  6. Universal Vibration Apparatus and accessories and attachments
  7. Vibration table
  8. Turn Table Apparatus
  9. Gear 9 Models
  10. Kinematic Models
  11. Dynamic Balancing machine
  12. Contact Type Tachometer
  13. Stop Watch
  14. Non-Contact type Tachometer

 

7 Metrology and Measurements Laboratory Students calibrate various machining instruments and also measure torque, force, surface finish, flatness, and various linear and angular measurements for the given specimen
  1. Vernier Caliper
  2. Vernier Height Gauge
  3. Vernier depth Gauge
  4. Slip Gauge Set
  5. Gear Tooth Vernier
  6. Sine Bar
  7. Sine Centre
  8. Micrometer
  9. Inside Micrometer
  10. Bevel Protector
  11. Bore Gauge with Dial
  12. Floating Carriage Micrometer
  13. Profile Projector
  14. Tool Makers Microscope
  15. Mechanical Comparator
  16. Pneumatic Comparator
  17. Electric Comparator
  18. Autocollimator
  19. Temperature Measuring Setup
  20. Force Measuring Setup
  21. Torque Measuring Setup
  22. Coordinate Measuring Machine
  23. Air Compressor
  24. Surface finish measuring equipment
  25. Displacement Measuring Setup
  26. Dial Gauge With Magnetic Base
  27. Telescope gauge
  28. Vibration Measuring Setup

 

8 C.A.D. / C.A.M. Laboratory In CAD lab, students are taught to create solid assembly models using design softwares such as solid works and creo parametric.
In CAM lab students learn CNC part programming in CNC lathe and CNC vertical milling machine in FANUC platform
In simulation and analysis lab, students learn structural analysis, thermal analysis and vibration analysis using simulation software ANSYS.
  1. HP Deskjet 2020 color printer
  2. HP Design jet 500 24” plotter (mono) – (C7769E)
  3. XL TURN machine – No. 477 & PC Controlled workbench
  4. XL MILL machine – No. 473 & PC Control & ATC
  5. Tooling package for XL MILL
  6. Tooling package for XL TURN
  7. Air compressor (110 lt) – 1.5 HP motor
  8. CAD – Software package (CREO parametric)
  9. Computer systems (lenova)
  10. HP 1020 laser printer
  11. CAD – Software package ( Solidworks 2010) – Additional software
  12. CAE – Software package (ANSYS v14.5)
  13. CAM – Software package (Master CAM v X6)
  14. Sony – LCD projector – DX 100

 

9 Mechatronics Laboratory Students will learn about mechanical, electrical and electronics system as an amalgamation known as mechatronics. Students also learn various simulation software such as automation studio, LABVIEW, and mat lab for better usage and application of mechatronics concepts.
  1. AUTOMATION STUDIO 5.7
  2. PLC HYDRAULIC TRAINER ACTUATION SYSTEM VPAT 12 L
  3. SPEED CONTROL AC & DC DRIVES
  4. PROCESS CONTROL TRAINER – VMPA 062A
  5. DESIGN ANF TESTING FLUID POWER WITH DATA AQUSITATION VMPT 304LC
  6. ELECTROPNUEMATIC TRAINER VMPT 302
  7. ELECTROPNUEMATIC TRAINER WITH PLC VMPT 303 LC
  8. HYBRID CONTROLLER AC& DC DRIVES
  9. MICROCONTROLEER TRAINER KIT
  10. STEPPER MOTOR CONTROLLER WITH MOTOR VBMB 13 A
  11. DIGITAL VIDEO DEVELOPMENT DM 6437
  12. MICROCONTROLEER TRAINER KIT 51 LC
  13. TRAFFIC LIGHT CONTROL SYSTEM
  14. TRANSDUCER TRAINER VTT01
  15. PROCESS CONTROL TRAINER – VMPA 062A

 

+Department Library

The Department library has a total number of 1825 books. It is having many national and international journals which include Journal of Engineering and material science, Journal of air-conditioning and refrigeration, ASHRAE Journal, Journal of Vibration Engineering and technologies, Journal of Manufacturing Engineering to name a few. It contains text books and reference books in the topics of thermal engineering, manufacturing engineering, design, CAD/CAM , general engineering, and management prescribed by the Anna university.

Teaching Faculty Members

Dr D Moses Raja Cecil

Head of the Department

hodmech@licet.ac.in

Dr L Antony Michael Raj

Professor & Principal

principal@licet.ac.in

Dr E Madhavan Pillai

Professor

drmadhavanpillai.e@licet.ac.in

Dr. N Godwin Raja Ebenezer

Professor

godwinrajaebenezer@licet.ac.in

Dr P Karthik

Professor

karthik.p@licet.ac.in

Mr S Francis Jeyapathi

Associate Professor

francisjeyapathi.s@licet.ac.in

Dr A Radha

Assistant Professor

radha.a@licet.ac.in

Ms V Queen Florence Mary

Assistant Professor & Academic Coordinator

queenmary@licet.ac.in

Mr N Prabhu Shankar

Assistant Professor

prabhushankar@licet.ac.in

Ms. Anne Miriam Alexander

Assistant Professor

annemiriam@licet.ac.in

Mr T R Paramasivam

Assistant Professor

paramasivam.tr@licet.ac.in

Mr R Pandian

Assistant Professor

pandian.r@licet.ac.in

Mr P Chandrasekar

Assistant Professor

chandrasekhar.p@licet.ac.in

Mr X Regis

Assistant Professor

regis.x@licet.ac.in

S Jackson Irudhayam

Assistant Professor

jacksonirudhayam.s@licet.ac.in

Mr J John Mathuram

Assistant Professor

johnmathuram.j@licet.ac.in

S Mohamed Aazif

Assistant Professor

aazif@licet.ac.in

Mr D James Deepak

Assistant Professor

jamesdeepak.d@licet.ac.in

Mr M Karthi

Assistant Professor

karthi.m@licet.ac.in

Mr E Sathish

Assistant Professor

sathish.e@licet.ac.in

Mr L Ezhil Ruban

Assistant Professor

ezhil.f@licet.ac.in

Mr G K Sathish Kumar

Assistant Professor

sathishkumar.gk@licet.ac.in

Mr M Martin Charles

Assistant Professor

martincharles.m@licet.ac.in

Mr A Jacob Moses

Assistant Professor

jacobmoses.a@licet.ac.in

Non-Teaching Faculty Members

Mr N. Krishnan

Lab Instructor

krishnan@licet.ac.in

Mr G. Senthil

Lab Instructor

senthil@licet.ac.in

Mr N. Neelakandan

Lab Instructor

neelakandan@licet.ac.in

Mr V. Selvakumar

Lab Instructor

selva@licet.ac.in

Mr A. Arockia Dass

Lab Instructor

arockia_dass@licet.ac.in

Mr S. Ganapathy

Lab Instructor

ganapathy@licet.ac.in

Mr S. Sadagopan

Lab Instructor

sadagopan.s@licet.ac.in

Mr J. Jegan

Lab Instructor

jegan.j@licet.ac.in
+Research Publications/Journals by Faculty

Name of the faculty Name of Journal Publication Details
Dr.D.Moses Raja Cecil Int. Journal of Soft Computing, (ISSN 1816-9503) Quantifying Interface Friction using Backward Spike and Forward Disc Forming Test , Volume-8, Issue-3, 2013, 143- 148.
Journal of Manufacturing Engineering (I) Friction Measurement in Cold Forming using Tribo- Tests , Volume-7, No.-2, 2012, 92-98.
European Journal of Scientific Research, (ISSN 1450-216X) Choosing a suitable tribo-test to quantify interface friction during cold forming , Volume-88, No.-3, October 2012, 394-402.
Journal of the Institution of Engineers (India): Series C (Springer), (ISSN 2250-0545) Quantifying interfacial friction in cold forming forward rod backward cup extrusion test , Issue-1, January- March 2012, 157-161.
Indian Journal of Science and Technology, (ISSN 0974-6846) Spike and Disc Forming Test for friction measurement in cold forming of aluminium alloys, Vol-4, Issue-6, June 2011, 652-656.
Journal of The Institution of Engineers (India), (ISSN 0257-6708) `Friction evaluation in metal forming using upsetting test’, Volume- 90, March 2010, 28-32.
Journal of The Institution of Engineers (India), (ISSN 0257-6708) `Friction measurement in bulk forming using spike forging test’, Volume – 86, March 2006, 43-47.

 

Name of the faculty Name of Journal Publication Details
Dr. N.Godwin Raja Ebenezer Applied Soft Computing Evolutionary Multi criteria Design Optimization of Robot Grippers, DOI: 10.1016/j.asoc.2008.04.001, Vol.9, pp. 159-172, 2009
International Journal of Advanced Manufacturing Technology Evolutionary Bi-criteria Optimum Design of Robots Based on Task Specifications. DOI: 10.1007/s00170-008-1483-8, Vol. 41, pp. 386-406, 2009.
Journal of Mechatronics and Intelligent Manufacturing Evolutionary Uncertainty Analysis and Allocation of Joint Tolerances in Robot Manipulators;, Vol. 1, No. 1/2,   Pp. 49-74, 2009.
European Journal of Scientific Research Forward Kinematics analysis of SCORBOT ER V Plus using Lab view;, , Vol. 72, No. 4,   Pp. 549-557, 2012.
International Review of Mechanical  Engineering (IREME) Evolutionary Optimum Design for a task specified 6 link planar robot;, (IREME) Vol. 8, No. 1,   Pp. 36-51, 2014.
International Journal of Mechanical Engineering and Technology(IJMET) Multi criteria trajectory planning with NURBS curves for cooperative robots, Vol 8, issue 5, May 2017,pp959-973,Article ID:IJMET:08_05_101,ISSN Print 0976 – 6340 and ISSN online 0976 – 6359
World Scientific News Advanced helical gear reducer design optimization through nature inspired algorithms,77(2)2017,267-280
International journal of    theoretical    and Applied mechanics (Research India publications) Helical spring design optimization in dynamic environment based on nature Inspired algorithms;, ISSN 0973-6085, Volume 12,Number 4(2017),pp709-739
World Scientific News Worm gear drive optimization considering industry constraints based on nature inspired algorithms, ,87,2017,Pp 205 – 221
International Journal of Engineering and Advanced Technology (IJEAT) Practical Optimal Design on Two Stage Spur Gears Train Using Nature Inspired Algorithms , ISSN: 2249 – 8958, Volume-8 Issue-6, August 2019.
SN Applied Sciences, Springer Advanced design optimization on straight bevel gears pair based on nature inspired algorithms – 1:1155, 2019

 

Name of the faculty Name of Journal Publication Details
Dr.E.Madhavan Pillai European Journal of Scientific Research (ISSN 1450-216X) Study on the Influence of Human Factors on Overall Equipment Effectiveness,Vol.53 No.2 (2011), pp.179-192

 

Name of the faculty Name of Journal Publication Details
Dr. P. Karthik Thermal Science Experimental And Numerical Investigation Of A Louvered Fin And Elliptical Tube Compact Heat Exchanger,vol 19, issue 2,  2015,  679-692.
Thermal Science Fanning Friction (f) and Colburn (j) Factors of a Louvered Fin and Flat Tube Compact Heat Exchanger, Vol. 21, Issue 1A, 2017, 141-150,
Alexandria Engineering Journal, Parametric studies on a louvered fin and flat tube compact heat exchanger using computational fluid dynamic, 2015.
Indian Journal of Science and Technology. The performance analysis of a louvered fin and flat tube compact heat exchanger using f and j factors, 2015.

 

Name of the faculty Name of Journal Publication Details
Dr.A.Radha Elsevier- Materials Research express-(ISSN 2053-1591) Processing and Characterization of Mechanical and Wear Behavior of Al7075 Reinforced With B4C and Nano Graphene Hybrid Composite. (Journal accepted)
Elsevier Materials Today, ISSN 2214-7853 An investigation the Mechanical and wear properties of AA6061 reinforced with Silicon carbide and Graphene Nano particles-Particulate Composites, pp. 2247–2253, 2016.
Applied Mechanics and Materials(ISSN 1660-9336) An investigation the Mechanical properties of Aluminum 6061 reinforced with Silicon carbide-Metal Matrix Composite, Vol. 787, pp. 568-572, 2015.
International Journal of Applied Engineering Research (ISSN 0973-4562) An investigation of mechanical properties on Aluminum 6063 reinforced with Silicon carbide and Graphene Nano particle by stir casting Technique-Metal Matrix Hybrid Composites,Vol.10, No.57, pp. 228–23, 2015.
International Journal of Applied Engineering Research, (ISSN 0973-4562) An investigation of mechanical properties on Aluminum 6063 reinforced with Silicon carbide and Graphene Nano particle by stir casting Technique-Metal Matrix Hybrid Composites, Vol.10, No.57, pp. 228–23, 2015.

 

Name of the faculty Name of Journal Publication Details
Mr. S. Jackson Irudhayam International Journal of Engineering Research and Development A Review on Importance and Recent Application of Polymer Composites in Orthopedics;Vol. 5, Issue 2, December 2012, pp.40-43.

 

Name of the faculty Name of Journal Publication Details
G K Sathish kumar Journal Reinforced Plastics Composite ISSN: 0731-6844 Structural analysis and mechanical properties of lignite fly-ash-added jute–epoxy polymer matrix composite. Volume 37, Issue (2): 2017, Page 90-104. (Impact Factor: 1.786)
Journal of Non Crystalline Solids ISSN: 0022-3093 Influence of Fluoride for Enhancing Bioactivity onto Phosphate Based Glasses. 493: 2018, 108-118. (Impact Factor: 2.70)
International journal of advances in production and mechanical engineering (IJAPME) Effects of Mechanical properties of jute-sisal/LFA reinforced epoxy polymer hybrid composite. 2015, volume1, issue 2.

 

Name of the faculty Name of Journal Publication Details
M. Martin Charles Applied Mechanics and Materials.(ISSN 1662-7482) Evaluation of Mechanical Property of Friction Welded EN24 Steel Joints, Applied Mechanics and Materials, (Vol. 591, pp. 108-111, 2014)
International Journal of Innovative Science and Research Technology (ISSN No: – 2456 – 2165) An Investigation of Mechanical And Metallurgical Properties of Friction Welded Steel Joint (Volume 2, Issue 5, May – 2017)

 

Name of the faculty Name of Journal Publication Details
Mr.A.Jacob Moses International Journal for Research in Applied Science & Engineering Technology (UGC Approved) ISSN 2321-9653 Aero Dynamic Analysis of Side body panels of Lancer EVO VII, Vol. 6 Issue 4,2018 pp: 3974-3979
International Journal of Trend in Scientific Research and Development (ISSN No 2456-6470 Optimization of Trimming and Piercing operations by introducing a new tool. Vol.2 Issue 3, 2018,pp: 2532-2536
International Journal of Recent Trends in Engineering and Research (ISSN No 2455–1457) Preparation and Characterization of Leather waste Polymer Composites, Vol.3 Issue 6, 2017, pp: 139-143. DOI: 10.23883/IJRTER.2017.3285.NXGRE
Advances in natural and applied sciences (Scopus Indexed) ISSN no. 1998-1090 Experimental Analysis and mechanical characterization of HDPE waste and leather waste polymer composites”,Vol 11(8), 2017 pp: 59-63
International Journal for Research in Applied Science & Engineering Technology(UGC Approved) ISSN 2321-9653 Design and Fabrication of Manual Ploughing and Seeding Machine”, International Journal for Research in Vol. 5 Issue 9, 2017
International Journal of Latest Trends in Engineering (ISSN No. 2319-3778) Experimental Analysis of Mechanical Behavior of Industrial waste filled polymer composites”, Vol 3, Issue 4, 2014, pp 114-117

 

Name of the faculty Name of Journal Publication Details
Mr. S. Glynn John AIAA Journal, The Ability of Objective Functions to Generate Non-Convex Pareto Frontiers, AIAA Journal, Vol.38, No.6, June 2000, pp. 1084-1091.
Journal of Mechanical Design (ASME) ELSEVIER (Renewable Energy) Interactive Physical Programming: Tradeoff Analysis and Decision-Making in Multi-criteria Optimization, AIAA Journal, Vol.38, No.5, May 2000, pp. 917-926.

 

Name of the faculty Name of Journal Publication Details
Dr.A.Gnana Sagaya Raj Applied Energy Energy Efficient Piston Configuration for Effective Air Motion- A CFD Study vol. (102)2013 pp347-354
Advanced Materials Research Flow Investigation on Different Combustion Chamber Configuration in a DI Diesel Engine – A CFD Approach; Vol. 505 (2012) pp 420-423
SAE Technical Paper 2015-24-2402, 2015 Spark Ignition Engine Simulation Using a Flame let Based Combustion Model
SAE Technical Paper No. 2013-01-2786 Analysis of In-Cylinder Air Motion in a DI Diesel Engine with Four Different Piston Bowl Configuration – A CFD and PIV Comparison
SAE Technical Paper No. 2013-01-2804 CFD Prediction of Combustion on Direct Injection Diesel Engine with Two Different Combustion Chamber Configurations

 

S.No. Name of the faculty Name of Journal & Publication Details
1 Anup Goel & Jacob Moses.A (2018) , 1st Edition, Manufacturing Technology-I, Technical Publications ISBN-9789333221184
2 Anup Goel & Jacob Moses.A (2017) ,4th Revised Edition, Manufacturing Technology-II, Technical Publications,ISBN-9789350998663
3 Jacob Moses.A (E-Book Publication)-(2017) “ HDPE Leather Waste Polymer Composites” E – Book lambert Publication. ISBN – 9786139830756

 

Name of the faculty Name of Journal Publication Details
G K Sathish kumar Synthesis and Characterization studies in Natural Fiber/ Lignite Fly Ash reinforced Geopolymer composites 23rd International Conference on Processing and Fabrication of Advanced Materials XXIII, Co-organizers DEAL, DRDO, Dehradun and The University of Akron, USA, organized at Department of Mechanical and Industrial Engineering, Indian Institute of Technology, Roorkee (IIT-R), India during December 05th – 7th 2014. (Abstract Accepted for Oral Presentation). I.K. International Publishing House Pvt Ltd – New Delhi, ISBN – 978-93-84588-18-2 (Vol. 2).
Mechanical properties of Lignite flyash filled fiber reinforced composites ISTE Tamilnadu & Pondicherry section Regional conference on “Innovations in Engineering Education & Research” organized at Rajalakshmi Engineering College, Chennai, India. November 14th and 15th 2014.
Thermal Stability of Natural Fibers (Jute, Kenaf, Sisal and Banana) and Lignite Fly Ash reinforced Epoxy Geopolymeric Composites 6th APM International Conference on Advancements in Polymeric Materials, organizers Advanced Research School for Technology and Product Simulation (ARSTPS) and Central Institute of Plastics Engineering and Technology (CIPET) Guindy, Chennai-600032, organized at Indian Institute of Science, Bangalore, India. February 20th – 22th, 2015.
Mechanical properties and characterization studies in natural fiber/ lignite fly ash reinforced polymer matrix composites 6th APM International Conference on Advancements in Polymeric Materials, organizers Advanced Research School for Technology and Product Simulation (ARSTPS) and Central Institute of Plastics Engineering and Technology (CIPET) Guindy, Chennai-600032, organized at Indian Institute of Science, Bangalore, India. February 20th – 22th, 2015.
Comparative evaluation on mechanical properties of natural fiber/ lignite fly ash reinforced composites 6th APM International Conference on Advancements in Polymeric Materials, organizers Advanced Research School for Technology and Product Simulation (ARSTPS) and Central Institute of Plastics Engineering and Technology (CIPET) Guindy, Chennai-600032, organized at Indian Institute of Science, Bangalore, India. February 20th – 22th, 2015.
Evaluation on mechanical properties of Natural Fibers / Lignite Fly Ash reinforced epoxy composites International Conference on Advances in Manufacturing and applications organizers Metallurgical and Materials Engineering organized at National Institute of Technology, Tiruchirappalli – 620015, Tamil Nadu, India. April 9th – 11th, 2015.
Comparative evaluation on mechanical properties of natural fiber/ lignite fly ash reinforced composites International Conference on Recent Trends in Analytical Chemistry organizers in association with Indian Society of analytical Scientist-chennai Chapter Royal society of Chemistry-south India Section organized at Department of Analytical Chemistry, University of Madras, Guindy campus, Chennai-600025. Dec 28th – 30th, 2015.
Fatigue and Dynamic Analysis on Rear Axle of Trucks National Conference on Recent Innovations in Production Engineering, (RIPE – 2010) at Anna University, Chennai MIT Campus, Chromepet, Chennai – 600 044
Cockpit Automation – Present day problems and solutions National Conference on Advancement & Recent Innovations in Mechanical Engineering ARIME 2012, SRM Easwari Engineering College, Chennai 600 089.

 

Name of the faculty Name of Journal Publication Details
E.MADHAVAN PILLAI Alternative Material Selection – A value Engineering Approach to achieve weight Reduction in Aero Space Application International Conference on Applications in operations research, conducted by Asia Pacific Operational Research Society (APORS), held at Indian Institute of Technology, NewDelhi, 2003.
Selection of maintenance policies and its impact in achieving effective equipment utilization in manufacturing and process industries International conference conducted by Operation Research Society of India (ORSI), in Heritage Institute of Management, Kolkata, 2007.
The impact of human factors in the calculation of overall equipment effectiveness in total productive maintenance National Conference on Business Optimization Research Wave, conducted by National Institute of Industrial Engineering (NITIE), Mumbai, 2007.
Quality and Productivity National Conference on Quality Engineering and Management Proceedings, Kumuraguru College of Technology, Coimbatore, 2004.

+Book Publications

S.No Name of the faculty Name of the Book and Publication Details
1. Anup Goel & Jacob Moses.A (2018) , 1st Edition, Manufacturing Technology-I, Technical Publications ISBN-9789333221184
2. Anup Goel & Jacob Moses.A (2017) ,4th Revised Edition, Manufacturing Technology-II, Technical Publications,ISBN-9789350998663
3. Jacob Moses.A (E-Book Publication)-(2017) “ HDPE Leather Waste Polymer Composites” E – Book lambert Publication. ISBN – 9786139830756
S.No Name of the faculty Name of Journal Publication Details
1. Dr.D.Moses Raja Cecil Int. Journal of Soft Computing, (ISSN 1816-9503)

Journal of Manufacturing Engineering (I)

European Journal of Scientific Research, (ISSN 1450-216X)

Journal of the Institution of Engineers (India): Series C (Springer), (ISSN 2250-0545)

Indian Journal of Science and Technology, (ISSN 0974-6846)

Journal of The Institution of Engineers (India), (ISSN 0257-6708)

Journal of The Institution of Engineers (India), (ISSN 0257-6708)

Quantifying Interface Friction using Backward Spike and Forward Disc Forming Test , Volume-8, Issue-3, 2013, 143- 148.

Friction Measurement in Cold Forming using Tribo- Tests , Volume-7, No.-2, 2012, 92-98.

Choosing a suitable tribo-test to quantify interface friction during cold forming , Volume-88, No.-3, October 2012, 394-402.

Quantifying interfacial friction in cold forming forward rod backward cup extrusion test , Issue-1, January- March 2012, 157-161.

Spike and Disc Forming Test for friction measurement in cold forming of aluminium alloys, Vol-4, Issue-6, June 2011, 652-656.

`Friction evaluation in metal forming using upsetting test’, Volume- 90, March 2010, 28-32.

`Friction measurement in bulk forming using spike forging test’, Volume – 86, March 2006, 43-47.

2. Dr.E.Madhavan Pillai European Journal of Scientific Research (ISSN 1450-216X) Study on the Influence of Human Factors on Overall Equipment Effectiveness,Vol.53 No.2 (2011), pp.179-192
3. Dr.N.Godwin

Raja Ebenezer

Applied Soft Computing
International Journal of Advanced Manufacturing TechnologyJournal of Mechatronics and Intelligent ManufacturingEuropean Journal of Scientific ResearchInternational Review of Mechanical  Engineering (IREME)International Journal of Mechanical Engineering and Technology(IJMET)World Scientific NewsInternational journal of    theoretical    and Applied mechanics (Research India publications)World Scientific News
Evolutionary Multi criteria Design Optimization of Robot Grippers, DOI: 10.1016/j.asoc.2008.04.001, Vol.9, pp. 159-172, 2009

Evolutionary Bi-criteria Optimum Design of Robots Based on Task Specifications. DOI: 10.1007/s00170-008-1483-8, Vol. 41, pp. 386-406, 2009.

Evolutionary Uncertainty Analysis and Allocation of Joint Tolerances in Robot Manipulators;, Vol. 1, No. 1/2,   Pp. 49-74, 2009.

Forward Kinematics analysis of SCORBOT ER V Plus using Lab view;, , Vol. 72, No. 4,   Pp. 549-557, 2012.

Evolutionary Optimum Design for a task specified 6 link planar robot;, (IREME) Vol. 8, No. 1,   Pp. 36-51, 2014.

Multi criteria trajectory planning with NURBS curves for cooperative robots, Vol 8, issue 5, May 2017,pp959-973,Article ID:IJMET:08_05_101,ISSN Print 0976 – 6340 and ISSN online 0976 – 6359

Advanced helical gear reducer design optimization through nature inspired algorithms,77(2)2017,267-280

Helical spring design optimization in dynamic environment based on nature Inspired algorithms;, ISSN 0973-6085, Volume 12,Number 4(2017),pp709-739

Worm gear drive optimization considering industry constraints based on nature inspired algorithms, ,87,2017,Pp 205 – 221

4. Dr.A.Gnana Sagaya Raj Applied Energy

Advanced Materials Research

SAE Technical Paper 2015-24-2402, 2015

SAE Technical Paper No. 2013-01-2786

SAE Technical Paper No. 2013-01-2804

Energy Efficient Piston Configuration for Effective Air Motion- A CFD Study vol. (102)2013 pp347-354

Flow Investigation on Different Combustion Chamber Configuration in a DI Diesel Engine – A CFD Approach; Vol. 505 (2012) pp 420-423

Spark Ignition Engine Simulation Using a Flame let Based Combustion Model

Analysis of In-Cylinder Air Motion in a DI Diesel Engine with Four Different Piston Bowl Configuration – A CFD and PIV Comparison

CFD Prediction of Combustion on Direct Injection Diesel Engine with Two Different Combustion Chamber Configurations

5 Mr. S. Jackson Irudhayam International Journal of Engineering Research and Development A Review on Importance and Recent Application of Polymer Composites in Orthopedics;Vol. 5, Issue 2, December 2012, pp.40-43.
6 Mr. S. Glynn John AIAA Journal

AIAA Journal

Journal of Mechanical Design (ASME)

ELSEVIER

(Renewable Energy)

The Ability of Objective Functions to Generate Non-Convex Pareto Frontiers, AIAA Journal, Vol.38, No.6, June 2000, pp. 1084-1091. Interactive Physical Programming: Tradeoff Analysis and Decision-Making in Multi-criteria Optimization, AIAA Journal, Vol.38, No.5, May 2000, pp. 917-926.

Exploration of the effectiveness of physical programming in Robust Design, Journal of Mechanical Design, Vol.122, June 2000.
Cost optimization of dish solar concentrators for improved scalability decisions, ELSEVIER, Volume 114,  Part B,December 2017, Pages 600-613

7 Mr. L. Ezhil Ruban Taylor & Francis Structural analysis of  Scorbot -ER Vu plus industrial robot manipulator Volume 2, 2014 – Issue 1 pages 309-325

+Conferences and Seminars

S. No Name of the faculty Name of Conference/ Symposium/ Workshop Details
1. Dr. Moses Raja Cecil D
    • 1. Int. Conf. on Recent Advances in Mechanical Engineering (INCRAME 2012)
    • 2. Int. Conf. on Recent Advances in Mechanical Engineering (INCRAME 2011)
    • 3. Natl. Conf. on Technological Advances in Manufacturing, Modeling and Analysis(TAMMA 2011)
    • 4. Natl. Conf. on Academic Research- Evolution getting Revolutionized
    • 5.  Natl. Conf. on Recent Advanced Trends in Mechanical, Automobile and Production Engineering (RATMAPE)
    • 6. Natl. Conf. on Advances in Robotics, Precision Engineering & Manufacturing Techniques (AIRPAM2008)
    • 7. Natl. Conf. on Advances in Materials and Manufacturing Technology
    • 8. Natl. Conf. on Emerging Trends in Engineering & Technology
    • 9. Second Natl. Conf. on Global Technologies in Manufacturing and Thermal Sciences (GTMTS 2007)
    • 10. Int. Conf. on Recent Advances in Materials and Processing (RAMP 2006)
    • 11. Natl. Conf. on Computer Applications in Mechanical Engineering (CAME-2005)
    • 12. Natl. Conf. on Material Processing and Failure Analysis (MPFA 2003)
    • 13. Natl. Conf. on Advances in Mfg. Systems (AMS 2003)
    • 14. Int. Conf. on Mfg., (ICM 2002)

      • Natl. Conf. on Processing of Metals

16 . Natl. Conf. on Recent Advances in Materials Processing (RAMP 2001)
17. Natl. Seminar on Advances in Metal Forming (METFORM 2000), Anna University, Chennai, March 15-16, 2000

  • Apr 19-20, 2012, Dr. M.G.R. Educational and Research Institute University, Chennai.
  • Apr 21-22, 2011, Dr. M.G.R. Educational and Research Institute University, Chennai.
  • Apr 8, 2011, St. Joseph College of Engineering, Chennai.
  • August 13-14, 2010, Dr. M.G.R. Educational and Research Institute, Chennai.
  • April 24-25, 2008, Dr. M.G.R. Educational and Research Institute, Chennai.
  • Mar 14-15, 2008, Anna University, Chennai.
  • Sep 21-22, 2007, Punjab Engineering College, Deemed University, Chandigarh (UT)

.

  • May 5, 2007, Saintgits College of Engineering, Kottayam.
  • Mar 29-30, 2007, Sethu Institute of Technology, Virudhu Nagar Dist.
  • Dec 15-16, 2006, PSG College of Technology, Coimbatore.
  • Dec 16, 2005, JNTU College of Engineering, Anantapur.
  • June 19-20, 2003, Regional Engineering College, Thiruchirapalli.
  • March 28-29, 2003, Jadavpur University, Kolkata.
  • Aug 9-11, 2002, Bangladesh University of Engineering and Technology, Dhaka.
  • Jan 31 & Feb-1, 2002, PSG College of Technology, Coimbatore.
  • Sep 7-8, 2001, Annamalai University, Annamalai Nagar.
  • March 15-16, 2000, Anna University, Chennai.
2. Dr. E. Madhavan Pillai
  • National conference on “ Business Optimization Research Wave.
  • International conference on “ Operational research as competitive edge.
  • National conference on “Quality Engineering and Management”
  • Sixth International conference of Association of Asia-Pacific Operational Research Societies
    • Feb. 15-17, 2007, NITIE, Mumbai
    • Jan. 3-5, 2007, Heritage Institute of Management, Kolkata,
    • Jan.2-3, 2004, Kumuraguru College of Technology, Coimbatore
    • Dec. 18-20, 2003, IIT Delhi

Student Strength

Batch GRAND TOTAL
2014-2018 2015-2019 2016-2020 2017-2021
BOYS GIRLS BOYS GIRLS BOYS GIRLS BOYS GIRLS
138 8 138 6 133 8 112 9 552
Total 146 Total 144 Total 141 Total 121
+Students Achievement
CO-CURRICULAR:

S.No Name of the student Register Number Year of Study Batch Competition Prizes Won, If Any
1 Ajoy Infant Raj A 32810114002 II 2010-2014 Paper Presentation II
2 Ajoy Infant Raj A 32810114002 II 2010-2014 Essay Writing
3 Ajoy Infant Raj A 32810114002 II 2010-2014 Oratorical
4 Ajoy Infant Raj A 32810114002 II 2010-2014 Jam
5 Joel Augustus E 32810114030 II 2010-2014 Essay Writing
6 A Pradeep Nirmal 32810114041 III 2010-2014 On-Spot Desmod III
7 A Pradeep Nirmal 32810114041 III 2010-2014 Project – Ultimate Hands On II
8 A Pradeep Nirmal 32810114041 III 2010-2014 Project X1 III
9 Suresh G 32810114053 III 2010-2014 Project X2 III
10 Aswin Raja T 32810114009 III 2010-2014 Project X2 III
11 A Pradeep Nirmal 32810114041 III 2010-2014 Project X2 III
12 R Vimal 32810114059 III 2010-2014 Project X3 I
13 A Pradeep Nirmal 32810114041 III 2010-2014 Project X3 I
14 A Pradeep Nirmal 32810114041 III 2010-2014 Best Modelling I
15 N Anand Sebastine 32810114005 III 2010-2014 Project X1 III
16 Vimal R 32810114059 III 2010-2014 Project X1 III
17 Kiran Ramakrishnan 311111114053 III 2011-2015 Ideas Challenge II
18 Nishant Jonathan Rubens 311111114073 III 2011-2015 Ideas Challenge II
19 Jude Rohit R 311112114057 I 2013 -2017 Paper Presentation II
20 Akash Jerome M 311112114004 I 2013-2017 Paper Presentation II
21 Sundar S 311112114321 II 2012-2016 Assembling And Dismantling II
22 Savio Rajkumar SX 311112114316 II 2012-2016 Assembling And Dismantling II
23 Arulius Savio P R 311112114018 II 2012-2016 Assembling And Dismantling II
24 Joe Paul Maria Anto J II 2012-2016 Quiz I
25 Jonathan David P 311112114054 II 2012-2016 Quiz I
26 Jonathan David P 311112114054 II 2012-2016 Quiz I
27 Jonathan David P 311112114054 II 2012-2016 Paper Presentation II
28 Vivian Gautham A M 311112114116 II 2012-2016 Aero Modelling III
29 Jonathan David P 311112114054 II 2012-2016 Multiple Rounds Simultaneous Impact I
30 Arulius Savio P R 311112114018 II 2012-2016 Oratorical I
31 Akash Jerome M 311112114004 II 2012-2016 Quiz II
32 Allen Rajiv Masilamani 311112114005 II 2012-2016 Quiz II
33 Allen Rajiv Masilamani 311112114005 II 2012-2016 Essay Writing I
34 Arulius Savio P R 311112114018 II 2012-2016 Jam III
35 Jude Rohit R 311112114057 II 2012-2016 Oratorical III
36 Arulius Savio P R 311112114018 II 2012-2016 Oratorical III
37 Jude Rohit R 311112114057 II 2012-2016 Paper Presentation II
38 Akash Jerome M 311112114004 II 2012-2016 Paper Presentation II
39 Arulius Savio P R 311112114018 II 2012-2016 Quiz I
40 Allen Rajiv Masilamani 311112114005 II 2012-2016 Quiz I
41 Leonard Vishal C 311114114071 II 2014-2018 Paper Presentation II
42 Sinita Maria Marcelina 311114114110 II 2014-2018 Paper Presentation II
43 Lakshmi K S 311111114056 IV 2011-2015 Paper Presentation III
44 Subaragulan D 311112114701 III 2012-2016 Paper Presentation III
45 Jude Rohit R 311112114057 III 2012-2016 Paper Presentation III
46 Jonathan David P 311112114054 III 2012-2016 Paper Presentation III
47 Jeffrey titus 311112114048 III 2012-2016 Paper Presentation III
48 Revanth Shankar 311113114085 II 2013-2017 Bottle Rocketrix II
49 J Alwyn Bastian 311113114010 II 2013-2017 Brain Strain II
50 Mohammed Ismail Azar 311112114076 III 2012-2016 Quiz I
51 Rajasekaran R 311112114087 III 2012-2016 Quiz I
52 Rajasekaran R 311112114076 III 2012-2016 Arresto Momentum II
53 Mohammed Azarudeen K 311112114076 III 2012-2016 Arresto Momentum II
54 J Michael Shank 311113114066 II 2013-2017 Paper Presentation III
55 M Ragul 311113114081 II 2013-2017 Paper Presentation III
56 Rohan Talerja R 311112114093 III 2012-2016 Project Presentation III
57 Mohammed Ismail 311112114076 III 2012-2016 Project Presentation III
58 Rajasekaran R 311112114076 III 2012-2016 Project Presentation III
59 M Ragul 311113114081 II 2013-2017 Paper Presentation III
60 Jonathan David P 311112114054 III 2012-2016 Paper Presentation I
61 Leonard Vishal C 311114114071 II 2014-2018 Project Presentation II
62 Lionel Cyril 311114114072 II 2014-2018 Project Presentation II
63 Patrik Priyadharshan 311114114083 II 2014-2018 Project Presentation II
64 Sathish R 311114114104 II 2014-2018 Project Presentation II
65 A.Ramu 311114114097 II 2014-2018 RC Soccer III
66 A.Ramu 311114114097 II 2014-2018 Water Rocketry III
67 Venkatesh G 311114114116 II 2014-2018 RC Soccer III
68 Venkatesh G 311114114116 II 2014-2018 Water Rocketry III
69 Arulius Savio P R 311112114018 II 2012-2016 Quiz I
70 Allen Rajiv Masilamani 311112114005 II 2012-2016 Quiz I
71 Sathish R 311114114104 III 2014-2018 Project Presentation II
72 Lionel Cyril 311114114072 III 2014-2018 Project Presentation II
73 Lionel Cyril 311114114072 III 2014-2018 Apogee 2016
74 Lionel Cyril 311114114072 III 2014-2018 Virtual Baja Saeindia 2015
75 Lionel Cyril 311114114072 III 2014-2018 Virtual Baja Saeindia 2015
76 Akilesh A 311114114013 III 2014-2018 3-D Modelling Workshop
77 Leonard Vishal C 311114114071 III 2014-2018 Paper Presentation III
78 Leonard Vishal C 311114114071 III 2014-2018 Paper Presentation II
79 Leonard Vishal C 311114114071 III 2014-2018 Paper Presentation
80 Leonard Vishal C 311114114071 III 2014-2018 Virtual Baja Saeindia 2016
81 Leonard Vishal C 311114114071 III 2014-2018 National Level Conferenece
82 Leonard Vishal C 311114114071 III 2014-2018 Paper Presentation II
83 Deeraj R 311114114031 III 2014-2018 3-D Modelling Workshop
84 Deeraj R 311114114031 III 2014-2018 Automobile Sketching And Styling Workshop
85 Deeraj R 311114114031 III 2014-2018 Certificate Of Excellence I
86 Leonard Vishal C 311114114071 III 2014-2018 Paper Presentation II
87 Deeraj R 311114114031 III 2014-2018 3-D Modelling Workshop
88 Deeraj R 311114114031 III 2014-2018 Automobile Sketching And Styling Workshop
89 Deeraj R 311114114031 III 2014-2018 Certificate Of Excellence I
90 Sinita Maria Marcelina 311114114110 III 2014-2018 Automobile Sketching And Styling Workshop
91 Sinita Maria Marcelina 311114114110 III 2014-2018 Paper Presentation II
92 Pon Surya P 311114114086 III 2014-2018 Automobile Sketching And Styling Workshop
93 Pon Surya P 311114114086 III 2014-2018 Paper Presentation
94 Pon Surya P 311114114086 III 2014-2018 Paper Presentation
95 Pon Surya P 311114114086 III 2014-2018 Indo-Sweden Symposium
96 Pon Surya P 311114114086 III 2014-2018 E-Foundry: Casting Designs And Simulations
97 Pon Surya P 311114114086 III 2014-2018 Seminar
98 Pon Surya P 311114114086 III 2014-2018 Paper Presentation
99 Davis Pandian Antony S 311114114030 III 2014-2018 Paper Presentation
100 Davis Pandian Antony S 311114114030 III 2014-2018 Paper Presentation
101 Jaswanth Jonathan. J 311114114055 III 2014-2018 Auto Cad 2017 Update
102 Jaswanth Jonathan. J 311114114055 III 2014-2018 Baja Virtuals
103 Patrick Priyadharshan. S 311114114084 III 2014-2018 Paper Presentation
104 Patrick Priyadharshan. S 311114114084 III 2014-2018 Paper Presentation
105 Patrick Priyadharshan. S 311114114084 III 2014-2018 Project Presentation II
106 Patrick Priyadharshan. S 311114114084 III 2014-2018 Baja Virtuals
107 Venkatesh. G 311114114116 III 2014-2018 Rc Car Race III
108 Devapriya 311114114032 III 2014-2018 Spellbee I
109 Devapriya 311114114032 III 2014-2018 Paper Presentation
110 Lokesh D 311111114311 II 2011-2015 Project Exhibition I

+Recent Industrial Visits

S.NO NAME OF THE COMPANY YEAR&SECTION BATCH DOV*

1

Indira Gandhi Center of Atomic Research(IGCAR) I & A 2018-22 15.03.19

2

RAMCO CEMENTS II & B 2017-21 05.03.19

3

ESTEEM POLYMERS I & B 2018-22 20.02.19

4

TIRUTTANI CO.OP.SUGAR MILLS LTD III & A 2016-20 31.01.19

5

Indira Gandhi Center of Atomic Research(IGCAR) IV&A 2015-19 20.07.18

6

Neyveli Lignite Corporation III & B 2016-20 27.08.18

8

Krishna Metallurgical Works III – A 2015-19 22.09.17

9

Ashok Leyland II – A 2013-17 21.09.17

10

RAMCO CEMENTS IV – A 2014-18 25.08.17

11

Ashok Leyland IV – B 2013-17 29.06.17

12

Kerala Electrical & Allied Engg.Co.Ltd IV – A 2013-17 27.03.17

13

TIRUTTANI CO.OP.SUGAR MILLS LTD III & B 2015-19 13.03.17

14

DAIMLER INDIA COMMERCIAL VEHICLES PVT.LTD II & A 2014-18 12.08.16

+Previous Industrial Visits

S.No Batch Year of Study Name of the Company Date of visit
1 2014-2018 III MECH A NEYVELI LIGNITE CORPORATION 08-09-2016
2 2013-17 III – MECH – B Daimler India Commercial Vehicles Pvt. Ltd., SIPCOT INDUSTRIAL ESTATE,SRIPERUMBUDUR, KANCHIPURAM – 602 105 12-08-2016
3 2014-18 II-MECH-B ESTEEM POLYMERS,CHENNAI-BANGALORE HIGHWAY, KUTHAMBAKKAM VILLAGE, THIRUVALLUR, CHENNAI – 602103 26-08-2016
4 2014-18 II MECH  A ARAVIND CERAMICS,RETTAMANGALAM VILLAGE, KANCHIPURAM DISTRICT, UTHIRAMERUR – 603107 30-08-2016
5 2012-16 III – MECH – A HYUNDAI MOTORS, SRIPERUMBUDUR,KANCHIPURAM – 602 105 31-03-2015
6 2013-17 II-MECH-B FORD INDIA PVT LTD., NH 45, S.P. KOIL POST, MARAIMALAI NAGAR CHENGALPATTU, KANCHIPURAM – 603 204 03-03-2014
7 2012-16 II-MECH-B ASHOK LEYLAND, KATHIVAKKAM, ENNORE, CHENNAI – 600057 08-10-2013
8 2013-17 II-MECH-A NEYVELI LIGNITE CORPORATION 28-03-2014
9 2013-17 II-MECH-B NEYVELI LIGNITE CORPORATION 02-04-2014
10 2013-17 IV MECH – A KERALA ELECTRICAL AND ALLIED ENGINEERING CO.LTD,KERALA 27.03.2017
11 2014-18 III-MECH-A RAMCO CEMENTS, ARIYALUR 16.03.2017
12 2015-19 II-MECH-A NEYVELI LIGNITE CORPORATION 23.03.2017
13 2014-18 IV -MECH B ASHOKLEYLAND, HOSUR 29.06.17
14 2016-2020 II – MECH A RAMCO CEMENTS, TRICHY 25.08.17
15 2015-19 III – MECH B ISRO, BANGALORE 19.09.17
16 2016-2020 II – MECH B ASHOKLEYLAND, ENNORE 21.09.17
17 2015-19 III –MECH A KRISHNA METALLURGICAL WORKS ,SRIPERUMBATHUR 22.9.17

Internships

Academic Year: 2018-19

S.NO

STUDENT NAME COMPANY NAME

NO OF DAYS

1

L. NIRMAL DILAN PONRAM ENTERPRISES

10

2

J.PIERSON  CLITUS ROBOTIC_ PANTECH SOLUTIONS

18

3

MEGA RAMESH ASHOK LEYLAND

20

4

D. MANOVA PONRAM ENTERPRISES

10

5

B. NAVEEN PRASAD PONRAM ENTERPRISES

11

6

M.MARIATOM DITC LIMITED

10

7

M.MARIATOM SP ENGINEERING

15

8

P.N. PAVITHRAN SP ENGINEERING

15

9

RAJKUMAR . P SP ENGINEERING

15

10

PAUL STEPHEN SUNDARAM CLYTAN LIMITED

26

11

SUKESH DANIEL NEWTECH INDUSTRIES

15

12

A. RAJESH NEWTECH INDUSTRIES

15

13

A. K STEPEHEN RAJA UNICORN ENGINEERS

30

14

SWETHA .G ASHOK LEYLAND

20

15

STANLY PINTO .L ASLO ELEVATORS

15

16

D. REVANT PRANAV ASLO ELEVATORS

15

17

M. SOUNDAR RAJAN ZINDAL ALUMNIUM LTD

15

18

RAGHUL VAIRAVEL AMAAT  INDIA PVT LTD

20

19

R. SOUNDARYA TNPL

10

20

GIFTSON E.T. MAHENDRA AND MAHENDRA

8

21

I. KEVIN JOSEPH MAHENDRA AND MAHENDRA

8

22

ANTO JEYARAJ D CLASSIC  MOULDS AND DIES

7

23

ARWIN MICHEL J GOODWIN MOTORS

7

24

PRINCETON B NECCO TOOLS

5

25

EVAN NERNARD RAJ CALSSIC MOULDS AND DIES

7

Academic Year: 2017-18

S.NO

STUDENT NAME COMPANY NAME

NO OF DAYS

1

JASMINE NOYAL F TEMPEL

30

2

JOSEPHINE VINNARASI WOORY AUTOMOTIVES INDIA

10

3

JEYA SURENDARAN THAYALAN MOTORS

14

4

AJAY ALEXANDER INTEGRAL COACH FACTORY

14

5

KRISHNARAJ  V S INTEGRAL COACH FACTORY

15

6

KHOUSHIK INTEGRAL COACH FACTORY

25

7

ANTO VIGNESH RAJA J LEAR CORPORATION

29

8

IGNATIUS DANIEL T CATER PILLAR

30

9

BISU JESUS ROHIT WABCO

30

10

PRITHIVRAJ N NATIOANL INSTITUTE OF WIND ENERGY

15

11

ANDREW ATHISAYARAJ LMW

30

12

SIVASUBRAMANIAN S NATIOANL INSTITUTE OF WIND ENERGY

15

13

MOHAMMAD KHALID GRNDFOS PUMPS INDIA

7

14

CIBIPRASANTH J KRT MOTORS

30

15

BENO PRINCE WABCO INDIA

20

16

DONY VASANTH TOSHIBA JAS POWER SYSTEM

30

17

ANTO JEYARAJ D CLASSIC  MOULDS AND DIES

30

18

ARWIN MICHEL J GOODWIN MOTORS

5

19

PRINCETON B NECCO TOOLS

5

20

EVAN NERNARD RAJ CALSSIC MOULDS AND DIES

10

21

JEFREE BERNARD RC DAS ENGINEERING

30

22

SOLOMON RAJ R BRAKES INDIA

8

23

CHRISPIN ANTO BRAKES INDIA PRIVATE LIMIMTED

12

24

CIVIN THOMAS V PRECISION MACHINES

10

25

JEFFREE BERNARD STEVENSON TAMILNADU PETROPRODUCTS

12

26

LEON CHARLES ABRAHAM INTEGRAL COACH FACTORY

5

27

ARAVINDAN T TAFE

5

28

LEO ANTONY B IP RINGS

5

29

VINU V HUNDAI

22

30

PAVITHRAN HINDUJA FOUNDARIES

22

31

RAJKIMAR HINDUJA FOUNDARIES

22

32

MARIATOM M HINDUJA FOUNDARIES

22

33

MELWIN AKASH HINDUJA FOUNDARIES

22

34

SHAUN PETER CORREYA ALLISON TRANSMISSION

30

35

PAUL ANTO KISHORE L G BALAKRISHNANA AND BROTHERS

7

36

DEUGAL B S KUN AUTO COMPANY

6

37

MUKESH S M SIMPSON & CO

28

38

SANJU TOSHIBA MACHINES

28

39

TJHOMAS OLIVER A TOSHIBA MACHINES

8

Inplant Trainings

Academic Year: 2018-19

S.NO

NAME OF THE STUDENT

COMPANY NAME

NO OF DAYS

1

DANIEL ARTHUR

TIDC AMBATTUR

15

2

T.S AJAY ALEXANDER

TOYOTA – KOYEMBEDU

12

3

G.KARTHICK BALAJI

PLEASANT FOODS PRIVATE LIMITED

10

4

T.GAVIN LEANDER

KCP LTD

5

5

J.ANTHONY CHARLES

KCP LTD

5

6

S.JASHUB GERSHON

KCP LTD

5

7

JASPER GODWIN.R

KCP LTD

5

8

P.BALAJI

ASHOK LEYLAND ENNORE

5

9

T.ARAVINDAN

UNLEEF

5

10

S.CHRIS JOSE

BHARGAVI RUBBER PVT LTD

10

11

G.DINESH KUMAR

VINAYAGA ENGINEERING WORKS

18

12

J.ARWIN MICHAEL

CSIR – CHEERI, TARAMANI

5

13

GENITH SILVESTOR

TNSTC

5

14

A.JAWAHAR

NLC

5

15

AARIF AHMAD

TAFE

3

16

JEROME

COAST GUARD

25

17

ABHISHEK MATHEW

DAIKIN

25

18

ABHISHEK MATHEW

TIDC AMBATTUR

14

19

MOHAMMED HAMMAD

TOYOTA – KOYEMBEDU

14

20

MOHAMMED HAMMAD

PLEASANT FOODS PRIVATE LIMITED

10

21

P.M. PRIYADHARSINI

KCP LTD

5

22

T.S JAYAPRIYADHARSINI

KCP LTD

5

23

K.S RAGUNANDAN

SAIL

3

24

KELVIN SARATH.C

SPIC TUTICORIN

5

25

LEONARD JOSHUA

SPIC TUTICORIN

5

26

MERWYN ACHILLES

SPIC TUTICORIN

5

27

MUZZAMIL.A

SPIC TUTICORIN

5

28

PADMANABHAN.N.B

SPIC TUTICORIN

5

29

MONISHRAJ.M

SPIC TUTICORIN

5

30

SIVA SIVA T

ASHOK LEYLAND ENNORE

5

31

S.SIVASUBRAMANAIAN

LANSON TOYOTA

6

32

D.RAGHUNATHAN

AMALGAMATIONS REPCO PVT LTD

5

33

VILPHERROY.J

NAL HELICOPTER DIVISION

6

34

P.YOHEGHWARAN

CHENNAI PORT TRUST

5

35

PRITHVI RAJ N

BRAKES INDIA PVT LTD

5

36

J.RANJITH

SHREE AMBIKA SUGAR AND POWER LTD

4

37

V.SAKTHIVEL

CHENNAI PETROLEUM CORPORATION LTD

5

38

S.RAGUL

SUNDARAM CLAYTON (TVS GROUP)

10

39

J.ROGER

NLC

12

Academic Year: 2017-18

S.NO

NAME OF THE STUDENT

COMPANY NAME

NO OF DAYS

1

MOHAMED KHALID

TATA MOTORS

6

2

KARTETI PRIYATHAM

SIXSIGMA SYATEMS

28

3

VASANTH PRAKASH

TATA MOTORS

6

4

RAVIVARMA

TATA MOTORS

6

5

MANOJ KUMAR

TATA MOTORS

6

6

KEVIN MARKS D ROZARIO

ROOTS GROUP OF COMPANIES

6

7

KEVIN VISHAL

ROOTS GROUP OF COMPANIES

6

8

KIRAN ADITYA

NCTPS

6

9

PRITHVI RAJ

NCTPS

6

10

V. VIJU DANIEL

CVRDE (DRDO)

5

11

SUDIR KUMAR

CVRDE (DRDO)

5

12

KRISHNARAJ

CVRDE (DRDO)

5

13

P.RUBAN

CVRDE (DRDO)

5

14

SOLOMAN RAJ

TATA MOTORS

12

15

SEBASTIAN SILVA

ASHOK LEYLAND

6

16

IGNATIOUS DANIEL

ASHOK LEYLAND

6

17

ANTONY AJITH

ASHOK LEYLAND

6

18

LINCY FLORANCE

TOYOTA

9

19

MICHELLE VERONICA

TOYOTA

9

20

MARIA SYLVESTER

LANSON TOYOTA

9

21

MICHALE INIYAN RAJ

LANSON TOYOTA

9

22

MONISH RAJ

LANSON TOYOTA

9

23

YOGESHWARAN

LANSON TOYOTA

9

24

SAM LIVINGSTON

INDIA CEMENTS

5

25

R.KOUSHIK

INDIA CEMENTS

5

26

RANGANATHAN

INDIA CEMENTS

5

27

MUKESH

INDIA CEMENTS

5

28

YESUDAS P. J

ICF

8

29

ARJUN A.S

RGB EXPORTS

5

30

JOSEPH KEVIN PETER

BRAKES INDIA PVT LTD

3

31

ASWIN VASANTH

RGB EXPORTS

5

32

KEVIN.K.BERNARD

TVS SUNDARAM

5

33

EVAN BERNARD

TVS SUNDARAM

5

34

ANTO JEYARAJ

TVS SUNDARAM

5

35

EVAN BERNARD

TVS SUNDARAM

5

36

GEORGE ZACHARIA

TVS SUNDARAM

5

+Placement & Higher Studies

Year Placed Higher Studies Entrepreneur
2017-18 60 21
2016-17 37 22 3
2015-16 36 27 1
2014-15 47 14 5

Previous year

+Frequently Visited Companies

Company Name
AMAZON
BBRAUN INDIA
BORGWARNER
CSS CORP
DECATHLON
e-Noah iSolution India Pvt Ltd
EXETER PREMEDIA SERVICES
FAURECIA AUTOMOTIVE SEATINGS
FRESH DESK
GENPACT
HCL
JUST DIAL
MILAGROW
MILAGROW HUMAN TECH
MRF
ROBERT BOSCH
ROX TRADING
SANMINA
SHREYAS HEALTHCARE
SNACK EXPERTS
SOCOMEC
SR(I) POWER TECH
STATLABS
STELLAR VALUE CHAIN SOLUTIONS
TECH MAHINDRA
THE ELLITIST
THERMAX
THINK &LEARN
THOUGHT FOCUS
VALEO
VALUED EPISTEMICS
VELMURUGAN INDUSTRIES
VEMBU TECHNOLOGIES
VKATION
WABCO

+University Rank Holders

S.No. Name of the Student Year of Passing University Rank
1 Mr J.DAVID 2014 30th Rank
2 Mr JOE MIKE PRAKASH 2014 45th Rank
3 Mr JEYASEELAN 2015 31st Rank
4 Mr VINOD VIVIAN 2015 42nd Rank

+Conferences/Seminars/Workshops

S.No. Name of the Event Date Chief Guest Organization
1. Two day workshop on Refrigeration and Air conditioning 8-1-2019 &

9-1-2019

COE Lab

Mr.N.K.Rao

Regional Director

South India

Daikin Air conditioning India Private Limited
2. Two day workshop on Refrigeration and Air conditioning 21-09-2018 &

22-09-2018

COE  Lab

Mr.Y.Ashok

Deputy Manager –

Customer Service

Daikin Air conditioning India Private Limited
3. Two day short term course on Casting Technology 28-11-2017 &

29-11-2017

Board Room

Mr. Shankar Das Valeo India Private Limited
4. International workshop on HVAC& R 19-09-2017

G 01

1.Dr.Sonny Sundaresan

2.Dr.M.P. Maiya

3.Mr.Chandrasekar

4.Mr.Sajeesh Kumar

5.Mr.V.K.Venkata Ramani

1.ASHRAE,USA

2.IIT Madras

3.DAIKIN

4.Carrier

5.Conasultant-Quality & Attitude

5. Two day short term course on Plastics engineering 21-11-2016 &

22-11-2016

F 11

Mr.N.Krishnamoorthy VALEO India Private Limited
6 Two day workshop on Automobile Styling and Design 12-09.2014 &

13-09-2014

G 01

Resource Person: IISC and IIT Delhi Alumni. Chief Resource Person: Head, Styling Division, Ashok Leyland, Chennai
7 Two week ISTE workshop on Engineering Mechanics 25-11-2013 to 05-12-2013

COE LAB

Prof.Dr.Mandar M Inamdar & Prof.Dr.Sauvik Banerjee. IIT BOMBAY.
8 Two week ISTE workshop on Engineering Thermodynamics 11-12-2012 to

21-12-2012

COE LAB

Professors from IIT Bombay IIT BOMBAY.

+Guest Lectures

S. No

Date

Title Of The Talk

Guest Speaker

Designation

Company

Audience

1

19-08-19 Total Quality Management Prof. Murugesan Visiting Faculty LIBA IV Years

2

08-08-19 Energy Conservation Mr. Anilkumar Director & Energy Auditor, Petroleum Conservation Research Association III YEAR

3

07-08-19 CAD Software- Solid works Mr. P. Venkatasubramaniam Business Development Manager CADD Centre II YEAR MECHANICAL

4

06-08-19 Career Opportunities in Railways Dr.Velu Rtd Senior Mechanical Engineer Indian Railways Final Year Mechanical Engineering Students

5

18-07-2019 CAD softwares (Introduction to Mechanical Design Softwares) Mr.Balaji, Manager, CADD India. II &III YEARS

6

19.2.19 Find, Focus, Fulfill – Preparation for Industry Mr Patrick Priyadharshan, Mechanics Engineer – M CAD, Valeo – GEEDS. II & III years(Mechanical)

7

13.2.19 Casting Mr Shankar Das, Casting Expert for VALEO Group Valeo India Private Limited. II A & B, 143 students

8

28.1.19 3D Printing/Additive Manufacturing & Applications Mr S Sekar, Foundry and Engineering Consultant, III A & B
143 Students

9

23- 01-19 Seminar on Overview of FEA Mr Karthic Sethuraman Senior Engineering Manager, Comfort and Driving Assistance Valeo India Private limited. III Years

10

22- 01-19 Engineering Metallurgy Mr S Kesava Pillai, Metallurgist, M/s Amalgamation Repco Ltd. II A & B,         143 Students

 

11

9.1.19 Plastic Engineering Mr N Krishnamoorthy, Technical Manager and Plastics Expert, Valeo India Private Limited. III A & B,

12

14-11-2018 Basics of Refrigeration & Air-conditioning Mr.Sonny Sundaresan CEO Sundaresan Consulting Services I Mech  A

13

12.10.18 Grooming young minds- Introduction to corporate world Mr.Eregamani Head- TQM &TPM Carbrundum Universal Limited I Mech

14

14.09.2018 “The Theory of Constraints” Mr. Arulius Savio Industrial Engineer B l Braun Medical Pvt. Ltd. IV MECH
15 12.09.2018. “Energy Conservation” Mr. Anilkumar, Director, Energy Auditor Petroleum Conservation Research Association. IV year mech

 

 

16 10.09.2018 “Introduction to HVAC” Mr.Cibi Chakravarthi , ASHRAE BoG Member ASHRAE ASHRAE
Members
17 6-9-18 3D Printing Mr.kraveenthar K Founder & Managing Director Maker Global

IV YEARS

18 03.09.18 “Adaptability is the “KEY” Ms Charumathi Sukumaran

Human Resources Manager

Valeo GEEDS

I & III YEARS OF ALL THE DEPARTMENTS
19 16-08-18 Cold Storage/ Chain Opportunities in India Mr.Ajit Pandalai Director Cold point Pvt ltd

ISHRAE Student Chapter .

20 10.08.2018 Maintenance Engineering Mr.S.Sekar Foundry & Engineering Consultant

IV MECH

21 18-07-2018 CREO & SOLIDWORKS Mr. P. Venkatasubramaniam Business Development Manager, CADD Centre

II MECH

22 02.07.2018 Industry Expectations from Students/Fresh Engineers. Mr.Claudious Fernando Director WOORI Automotives.

Mechanical Department

23 22.02.2018 Opportunities for Engineers in Defense Sector Prof Anto Consultant CHISEL Academy

III Mech

24 23-01-2018 Electrical and Fire Safety in Air conditioning Equipment Mr.Vijayabasker Senior ASHRAE Member ASHRAE ASHRAE Student members
25 19-01-18 Spoken Tutorial Mrs.Shyama Iyer National coordinator, Spoken Tutorial , IIT Bombay. II MECH &III
MECH
26 13-12-2017 The Future of Mechanical Engineering Mr.Rajan Babu Chief Executive Officer & Director HR Arghaa HR Technologies.

Mech III & IV

27 08-12-2017 Refrigeration and Air Conditioning Dr.Joseph Sekhar Principal St.Xavier’s Catholic College of Engineering Mech II & III

 

28 10-10-2017 REFRIGERATION & AIR CONDITIONING Mr.MANSOOR BHAVNAGARWALA PRESIDENT ASHRAE CHAPTER

I MECH

29 14-09-2017 INTERVIEW PREPARATION Mr.J.PREMACHANDRAN CONSULTANT L&T (Rtd)

IV MECH

30 29-6-2017 ANSYS & HYPERMESH Mr.P.VENKATSUBRAMANIAN Business Development Manager CADD Centre  III MECH

 

31 28-6-2017 CREO&CATIA Mr.P.VENKATSUBRAMANIAN Business Development Manager CADD Centre

II MECH

32 27-02.2017 INDUSTRY ORIENTED SKILL TRAINING IN AUTOMOBILE ENGG MR.VENKATARAMANA BUSINESS HEAD INSTITUTE OF INDUSTRIAL DESIGN

II MECH A,B &C

33 14.02.2017 non destructive examination Mr. J.VIVEKANANDAN TRAINER TWG GROUP

IV MECH A&B

34 09.09.2016 SUSTAINABILITY & GREEN BUILDING KARTHIC NARAYANAN  Director  EN3

II MECH A&B&C

35 01.09.2016 DIGITAL PROTOTYPE MR.PAVITHRAN  Business Development Manager  eSTARMAX  TECHNOLOGIES pvt Ltd III MECH B

 

36 03.8.2016 MODELING SOFTWARE SAGAR MEHTA TECHNICAL LEAD  KKM Soft

II MECH A&B

37 30.07.2016 CARRIER GUIDANCE IN INDIA MR ATIQ AZIZ  Director  Score Getter

III MECH A&B

38 09.07.2016 CNC PROGRAMMING & ITS SCOPE IN INDUSTRIES MR SAMPATH KUMAR  Senior Design Engineer,  Ashok Leyland

III MECH A&B

39 08.03.2016 Design considerations & Job Opportunities Mr.Moris Christopher Jesumarian, JGM, Chennai Piping Head

IV MECH

40 29.02.2016 LATEST TRENDS & TECHNOLOGIES IN NEW PRODUCT DEVELOPMENT USING CNC MACHINING Mr.AjithaPrabhu  Director  Solid Trust Technologies india pvt Ltd.

III MECH A&B

 

41 22.02.2016 Engineers role in Industries Mr.K.Babu, Retd.Manager, Rane Engine Valves Ltd

IV MECH

42 19.02.2016 ENTREPRENEURSHIP DEVELOPMENT Mr.Shanmugam, MD, Design Desk India pvt Ltd.

III MECH

43 17.02.2016 Basics of Refrigeration and Air Conditioning Mr. V. Sridhar, Director, ENMAC Pvt Ltd.

ASHRAE Members

44 10.02.2016 JOB OPPORTUNITIES IN HVAC Mr.FernoSusai, Principal Trainer, INCEPTION,Chennai-10

III MECH A

45 10.02.2016 Human Space Exploration : Challenges & Opportunities Dr.AntonyJeevarajan,, Deputy Chief NASA

IV MECH & II MECH

46 09.02.2016 Importance Of Communication Skills Mr. Shane Jordan, HOD, Insync Learning &Development

III MECH A

47 05.02.2016 JOB OPPORTUNITIES IN HVAC Mr.FernoSusai, Principal Trainer, INCEPTION,Chennai-10

III MECH B

+Upcoming Events

S.NO

EVENT

Topic

Tentatively planned 2019 & 2020

5

Guest Lecture

(i) DFMEA (Functional and Effective Risk Analysis)

(ii) Knowledge on Alternator and Automotive charging system

(iii) Function of Alternator Regulator and its interface with ECU

Nov – 2019

6

Guest Lecture

Clutch disc

Nov – 2019

7

Guest Lecture

Plastics Engineering & Simulation

Dec – 2019

8

Guest Lecture

Geometric Dimensioning and Tolerancing (GD&T)

Dec – 2019

9

Guest Lecture

Multibody simulation

Jan – 2020

10

Guest Lecture

Structural simulation – Linear & Non Linear

Jan – 2020

11

Guest Lecture

Plastics Engineering & Simulation

Feb – 2020

12

Guest Lecture

NVH Simulation

Feb – 2020

13

Guest Lecture

CFD Simulation for Automotive

Mar – 2020

14

Guest Lecture

1. Design_optimization of power train system and Staic and Nonlinear simulation

2. Static Linear analysis

Mar – 2020

15

Guest Lecture

16

Guest Lecture

1. Linear & Nonlinear Simulation

2. Advance Nonlinear Simulation

3. Fatigue

4. Electronic Reliability

5. Vibration Simulation

Aug – 2019

17

Guest Lecture

1. Engineering Design

2. Composite Materials

3. Material Science for Automobile applications

Aug – 2019

18

Guest Lecture

Fatigue

Sept – 2020

19

Guest Lecture

Power Train System

Sept – 2020

Membership in Professional Bodies

1. ASHRAE – American Society of Heating, Refrigerating and Air-Conditioning Engineers
2. SAE – Society of Automotive Engineers

Future Directions

  • To establish a research centre and promote patents
  • To start a PG program in Thermal/ Design Engineering
  • To promote consultancy work
  • To provide industry level training in HVAC and Automobile

Magazine and Newsletters

About Forge:

The Mechanical Department presents Forge, a quarterly mechanical newsletter that is exclusively dedicated to the Mechanical engineers of LICET. The ultimate aim is to refresh and rejuvenate the minds of the Engineers of the future. Ranging from automobiles to the latest technological advancements, FORGE gives a bird’s eye view of the world of Mechanical Engineering. The assortment includes automobile news, placement related articles, technological news, imminent personalities, department happenings and even an elite section for students to exhibit their innate talents, be it technical or non-technical. FORGE is a platter of knowledge that you would need if you were to lead the future of Mechanical Engineering.

Academic Year/Month Magazine/Newletter
June 2019 Download Here
March 2019 Download Here
December 2018 Download Here
September 2018 Download Here
June 2018 Download Here
March 2018 Download Here
December 2017 Download Here
September 2017 Download Here
June 2017 Download Here
March 2017 Download Here
December 2016 Download Here
September 2016 Download Here
June 2016 Download Here
March 2016 Download Here
December 2015 Download Here
September 2015 Download Here

Events Reports

Event/Programme Date Report
Guest Lecture – Composite Materials 22.08.2019 Download Here
Guest Lecture – Energy Conservation 08.08.2019 Download Here
Guest Lecture – CAD Software- Solid works 07.08.2019 Download Here
Guest Lecture – Career Opportunities in Railways 06.08.2019 Download Here
Guest Lecture – CAD Software 18.07.2019 Download Here
Team Turbonites 02.08.2018 to 04.08.2018 Download Here

Photo Gallery of Events

  • Event

  • Event

  • Event

  • Event

  • Event

  • Event

  • Event

Head of the Department

Dr D Moses Raja Cecil, AMIE., M.E., Ph.D.

hodmech@licet.ac.in

Class Advisor Details

Mr. T R Paramasivam

paramasivam.tr@licet.ac.in
I st Year

Mr. Mohamed Aazif

aazif@licet.ac.in
II nd Year

Mr. Ezhil Ruban

ezhil.f@licet.ac.in
III rd Year

Mr. X Regis

regis.x@licet.ac.in
IV th Year

Dr.Godwin Raja Ebenezer N

godwinrajaebenezer@licet.ac.in
I st Year

Mr. Sathish E

sathish.e@licet.ac.in
II nd Year

Mr. James Deepak D

jamesdeepak.d@licet.ac.in
III rd Year

Mr Martin Charles M

martincharles.m@licet.ac.in
IV th Year

Mr. Jackson Irudhayam

jacksonirudhayam.s@licet.ac.in
I st Year

Mr. Chandrasekhar

chandrasekhar.p@licet.ac.in
II nd Year

Mr. R Pandian

pandian.r@licet.ac.in
III rd Year

Dr. E Madhavan Pillai

drmadhavanpillai.e@licet.ac.in
IV th Year

Mr.Jacob Moses A

jacobmoses.a@licet.ac.in
I st Year

Dr. Radha A

radha.a@licet.ac.in
II nd Year

Mr. John Mathuram

johnmathuram.j@licet.ac.in
III rd Year

Mr Karthi M

karthi.m@licet.ac.in
IV th Year